Mizuno T20 White Satin Wedge 2020

Mizuno T20 White Satin Wedge

The precision and feel of Mizuno’s Grain Flow Forged HD process suits the manufacture of wedges like no other. Perfected for over 50 years at one factory in Hiroshima, Japan – Mizuno’s forging expertise is revered for its consistency of manufacture, distance control and incredible feedback. A reputation most commonly associated with Mizuno irons – but with even more payback in the wedges where touch and feel are most critical.

Features

• Grain Flow Forged HD: Enhanced Grain Flow Forging process that increases grain density in the impact area for the ultimate soft, solid, consistent feel
• 1025 Boron: A carbon steel that features 30% greater strength
• Harmonic Impact Technology: Fine tuned head geometry delivers ideal impact feel and feedback
• Quad Cut Grooves: Milled narrow/deep grooves optimized for stronger lofts and wide/shallow grooves optimized for higher lofts
• Hydroflow Micro Grooves: Laser etched microscopic grooves help channel away moisture for maximum spin in wet conditions
• Face Milling Lines: Increased surface roughness to increase spin nearer the green
• Loft/COG Flow Design: The COG of the wedge flows throughout the set to give more control and versatility
• Bounce Specific Sole Grinds: Matched bounce and sole grind for an ideal level of versatility
• Loft Specific Head Shapes: Graduated head shapes from pitching wedge to lob wedge ideally suited for how each wedge is used

Mizuno T20 White Satin Wedge Product Specs

Club #	Stock	LH	Loft º	Lie º	Bounce º	Length”	Grind
45/05	N/A	Yes	45	63.0	05	35.5	Standard Bevel
46/06	X	Yes	46	63.0	06	35.5	Standard Bevel
47/07	N/A	Yes	47	63.0	07	35.5	Standard Bevel
48/08	N/A	Yes	48	63.0	08	35.5	Standard Bevel
49/06	N/A	Yes	49	63.0	06	35.25	Standard Bevel
50/07	X	Yes	50	63.0	07	35.25	Standard Bevel
51/08	N/A	Yes	51	63.0	08	35.25	Standard Bevel
52/09	X	Yes	52	63.0	09	35.25	Standard Bevel
53/10	N/A	Yes	53	63.0	10	35.25	Standard Bevel
54/08	X	Yes	54	63.0	08	35.25	Aggressive C Grind
54/12	N/A	Yes	54	63.0	12	35.25	Subtle M Grind
55/09	N/A	Yes	55	63.0	09	35.25	Aggressive C Grind
55/13	N/A	Yes	55	63.0	13	35.25	Subtle M Grind
56/06	N/A	Yes	56	63.0	06	35.25	Subtle M Grind
56/10	X	Yes	56	63.0	10	35.25	Aggressive C Grind
56/14	X	Yes	56	63.0	14	35.25	Subtle M Grind
57/07	N/A	Yes	57	63.0	07	35.25	Subtle M Grind
57/11	N/A	Yes	57	63.0	11	35.25	Aggressive C Grind
57/15	N/A	Yes	57	63.0	15	35.25	Subtle M Grind
58/04	N/A	Yes	58	63.0	04	35.25	Aggressive C Grind
58/08	X	Yes	58	63.0	08	35.25	Subtle M Grind
58/12	N/A	Yes	58	63.0	12	35.25	Aggressive C Grind
58/16	N/A	Yes	58	63.0	16	35.25	Subtle M Grind
59/05	N/A	Yes	59	63.0	05	35.25	Aggressive C Grind
59/09	N/A	Yes	59	63.0	09	35.25	Subtle M Grind
60/06	X	Yes	60	63.0	06	35.25	Aggressive C Grind
60/10	X	Yes	60	63.0	10	35.25	Subtle M Grind
61/07	N/A	Yes	61	63.0	07	35.25	Aggressive C Grind
62/08	N/A	Yes	62	63.0	08	35.25	Aggressive C Grind

Note: This is for your reference only and does not denote the content of the product.