Cobra King Snakebite One Length Wedge
The KING COBRA ONE Length Wedge is designed at 37.50” to complement a ONE Length iron setup. A ONE Length configuration promotes a repeatable setup and swing for increased consistency and accuracy while a new SNAKEBITE full-face groove design enhances spin around the green.
Technology
40% SHARPER GROOVES
A new SNAKEBITE groove design uses a re-engineered cutting method that replaces tools more frequently to tighten groove tolerances, maximize groove volume, and create the sharpest and most accurate groove possible. The new design results in 11% deeper grooves, and 40% sharper groove edges to impart maximum spin on the ball.
Full-Face Groove
- Groove Shape:
Wide & Shallow
- Lofts:
56°, 58°, 60°
- Performance:
Wider and shallower full-face grooves that extend to the toe create more spin on shots with an open face when the ball is more likely to make contact with the toe area.



Cobra King Snakebite One Length Wedge Product Specs
| Loft | Bounce | Grind | Lie Angle | Offset (MM) | Length (Arccos grip adds .25″ in custom) |
Swing Weight | Stock Flex | RH/LH |
| 48° | 8° | Versatile | 62.5° | 1.0 | 37.25″ | D1.5 | S | RH |
| 52° | 8° | Versatile | 62.5° | 1.0 | 37.25″ | D1.5 | S | RH/LH |
| 54° | 10° | Versatile | 62.5° | 1.0 | 37.25″ | D1.5 | S | RH |
| 56° | 10° | Versatile | 62.5° | 1.0 | 37.25″ | D1.5 | S | RH/LH |
| 60° | 8° | Versatile | 62.5° | 1.0 | 37.25″ | D1.5 | S | RH/LH |
NOTE
This is for your reference only and does not denote the content of the product.
Shafts
KBS Hi-Rev 2.0 (125g)

| Model | Flex | Shaft Weight | Kick Point | Trajectory | Spin | Tip Diameter |
| KBS Hi-Rev 2.0 (125g) | Stiff | 125g | High | Low | Low | 0.355 |
Lamkin Crossline STD (58R) – Black (50g)

Specification
| Construction | Finish | MSRP |
| Cast | N/A | $159.00 |























Reviews
There are no reviews yet.